SCHMIDT® Measuring value module MD 10.020

Standard volume flow and medium temperature at a glance!

2-line display module
Direct output of standard volume flow V_N and medium temperature T_M
Remote display for optimal readability
No extra power supply necessary
Plug-and-Play

In many installations, displays built into the flow sensor either cannot be seen or due to the mounting position of the sensor simply cannot be read. Nevertheless, there is a need to display the measured values of the sensors on site and at a glance.

Now this can be realised with the SCHMIDT^® measuring value module MD 10.020 in a very easy and simple way. A cable with a length of 0.60 m is included allowing the user to place the display module in a way to ensure best position for reading it.

The distance between sensor and display module MD 10.020 can be increased up to 30 m by using a longer cable. If required, display modules of several sensors can be placed on site in one central location to facilitate a perfect overview.

Art.-No. 554 900

SCHMIDT Technology – Simply a question of better measurement

Specifications

Technical data
Display	2-line 7-segment-LED with 4 digits (red, height 14.2 mm, 1 or 2 decimal places)
Refresh rate	4 Hz
Interpretation of measured values
1st line	Standard volume flow V_N (0 … 99.99/999.9 Norm-m³/h)
2nd line	Medium temperature T_M (-99.9 … +999.9 °C)
Operating temperature
Operating temperature	-20 … +70 °C
Storage temperature	-25 … +80 °C
General data
Humidity	Measuring mode: Non-condensing (< 95 % RH)
Power supply & communication	Via module connector of SCHMIDT^® sensors
Current consumption	Typ. 16 mA (max. 22 mA)
Electrical connection	Plug-in connector M12 (A-coded), male, 5-pin Additional cable with 0.6 m length (content of delivery)
Maximum cable length	L < 30 m; wire ≥ 0,25 mm², unshielded
Mounting position	Arbitrary
Installation	Double-sided enclosure flanges
Protection type	IP65
Protection class	III (SELV) / PELV (EN 50178)
Dimensions (L x W x H)	90/106 mm x 62 mm x 33 mm
Weight	140 g