SCHMIDT® TorquePress

SCHMIDT^® TorquePress

Compact, highly efficient and with a hollow shaft motor

In addition to the ServoPress series, the SCHMIDT^® TorquePress is characterized by a number of special features. Among other things, a hollow-shaft torque motor is used, which enables very high press forces with a very high motor torque without additional mechanical transmissions.

Compared to other electric presses, the noise level remains remarkably low under all load conditions. The spindle nut, which is driven directly without the use of additional gears, enables very high levels of efficiency.

Thanks to the hollow shaft motor, the TorquePress is particularly compact and enables short overall lengths.

SCHMIDT^® TorquePress are EC type approved in connection with the security technology options SmartGate, SmartGuard and light curtain as well as optionally with the particularly economical 2-hand operation.

Process control behavior

Distance measurement takes place directly on the ram, which results in extremely high positioning and repeat accuracy.
Absolute position measuring system, so no reference run is necessary.
Highly accurate pressing force detection through direct force transmission into the sensors

Technical Data

Technical data	TorquePress 520	TorquePress 560
Force F max. S3 25% 20 sec	20 kN	100 kN
Force F 100% ED	10 kN	50 kN
Slide stroke	250 mm	300 mm
Drive control resolution	& lt; 0.1 µm	& lt; 0.1 µm
Ram speed (max.)	260 mm / s	200 mm / s
Drive	Ball screw drive	Planetary roller screw drive
Motor / nut ratio	1/1	1/1
Degree of protection	IP50	IP40
Weight approx.	95 kg	230 kg
max. Tool weight	25 kg	100 kg
Tool dimensions WxD	300 mm x 230 mm	370 mm x 230 mm
Network connection automation component	3 x 400 to 480 V AC / 50 - 60 Hz max.back-up fuse 16 A	3 x 400 to 480 V AC / 50 - 60 Hz max.back-up fuse 32 A
Performance at nominal load	5 kW	17 kW
plunger
Ram bore mm / N	ø 20 ^H7	ø 20 ^H7
Ram diameter mm / M	ø 50 ^H6	ø 60 ^H6
torsional backlash	± 0.04 °	± 0.02 ° (preloaded)
Noise level
Speed when measuring	0 - 260 mm / s	0 - 200 mm / s
Level value dBA	58	65
Dimension H / W / D	1132 mm / 163 mm / 315 mm	1438 mm / 304 mm / 255 mm

370 x 230StellflächeB x SL 5mm300 x 492370 x 585Oø mm12,512,5SL 1mm8295SL 2mm300350SL 3mm50SL 4mm400SL 5mm492585SL 6mm530620SH 1mm670880SH 2mm16622097,5SB 1mm280350SB 2mm300370Gewichtkg120320Anzugsmo. Befestigungsschr.MaNm5050ArbeitsplatzNetzanschluss* Automationskomponente3 x 400 bis 480 V AC / 50 – 60 Hz max. Vorsicherung 16 A3 x 400 bis 480 V AC/ 50 – 60 Hz max. Vorsicherung 32 ALeistungPkW5

TorquPress		TP200
Portal
Ausladung	C	mm	-
Tischbohrung	D	ø mm	40H7
Arbeitshöhe	F	mm	560
Tischhöhe	K	mm	115
Tischgröße	B x T	mm	-
Stellfläche	B x SL 6	mm	810 x 610
	O	ø mm	17,5
	SL 1	mm	155
	SL 2	mm	-
	SL 3	mm	-
	SL 4	mm	300
	SH 1	mm	850
	SH 2	mm	2990
	SB 1	mm	600
	SB 2	mm	810

Dimensions

TorquPress			TP520	TP560
Frame
Projection	C	mm	160	160
Table hole	D	ø mm	40H7	40H7
Working height	F	mm	340	420
Table height	K	mm	132	180
Table size	W x D	mm	300 x 230	370 x 230
Floor space	B x SL 5	mm	300 x 492	370 x 585
	O	ø mm	12.5	12.5
	SL 1	mm	82	95
	SL 2	mm	300	350
	SL 3	mm		50
	SL 4	mm		400
	SL 5	mm	492	585
	SL 6	mm	530	620
	SH 1	mm	670	880
	SH 2	mm	1662	2097.5
	SB 1	mm	280	350
	SB 2	mm	300	370
Weight		kg	120	320

TorquPress		TP200
Portal
Projection	C	mm	-
Table hole	D	ø mm	40H7
Working height	F	mm	560
Table height	K	mm	115
Table size	W x D	mm	-
Floor space	B x SL 6	mm	810 x 610
	O	ø mm	17.5
	SL 1	mm	155
	SL 2	mm	-
	SL 3	mm	-
	SL 4	mm	300
	SH 1	mm	850
	SH 2	mm	2990
	SB 1	mm	600
	SB 2	mm	810